(教材编号：2275 第1,2,3,6,7章)
1、远程管理与协助
2、性能和监视
3、设备驱动程序维护
4、服务器灾难恢复
5、软件更新SUS

讨论：实践案例讨论

微软2003专题四：服务器系统维护(20080121)在线专题授课音频

1、You are configuring SUS for a group of Web servers. You want the Web servers to
update themselves nightly based on a list of approved updates on your SUS server.
However, once in a while an administrator is logged on, performing late-night
maintenance on a Web server, and you do not want update installation and potential
restart to interfere with those tasks. What Windows Update policy configuration
should you use in this scenario?
a. Notify For Download And Notify For Install
b. Auto Download And Notify For Install
c. Auto Download And Schedule The Install

The correct answer is c. You want the Web servers to update themselves, so you must schedule
the installation of updates. However, an administrator always has the option to cancel the
installation.

2、You want all network clients to download and install updates automatically during
night hours, and you have configured scheduled installation behavior for Automatic
Updates. However, you discover that some users are turning off their
machines at night, and updates are not being applied. Which policy allows you to
correct this situation without changing the installation schedule?
a. Specify Intranet Microsoft Update Service Location
b. No Auto-Restart For Scheduled Automatic Updates Installations
c. Reschedule Automatic Updates Scheduled Installations
d. Configure Automatic Update

The correct answer is c. Updates are automatically downloaded using background processes
and idle bandwidth, but the installation is triggered by the specified schedule. If a computer is
turned off at the installation time, it waits until the next scheduled date and time. The Reschedule
Wait Time policy, if set between 1 and 60, causes Automatic Updates to start update installation
1 to 60 minutes after system startup.

3、You have finished configuring a new display driver, and are prompted to restart
the computer for the changes to take effect. Shortly after logging on, the computer
screen goes blank, making working on the computer impossible. Which troubleshooting
techniques or tools will allow you to recover most easily from the problem
with the display driver?
a. Last Known Good Configuration
b. Driver Rollback
c. Safe mode
d. Recovery Console

The correct answers are b and c. The Last Known Good Configuration option is useless
because you have logged on to the computer, making the last changes permanent. Safe mode
will allow you to roll back the driver by using Device Manager.

4、You are installing a new 200 GB disk drive. You want to divide the disk into five
logical volumes for the operating system, applications, user home directories,
shared data, and a software distribution point. The drive space should be distributed
equally among the five logical volumes. You also want to leave 50 GB as
unallocated space for future extension of a logical volume. Considering basic and
dynamic disks and the types of logical volumes they support, what are your configuration
options?

Allocate 150 GB of disk space to leave 50 GB unallocated. That means that each of the five logical
volumes will be 30 GB. You can configure the drive as a basic disk with zero to three primary
partitions, each of which supports one logical drive (which is the logical volume for a
basic disk). The remaining two to five logical volumes would be created as logical drives in an
extended partition. If the disk is configured as a dynamic disk, all five logical volumes would be
set up as simple volumes. Although these configurations are valid answers to the question, the
best practice in this scenario would be to configure the disk as a dynamic disk, for reasons you
will learn in the next lesson.

5、You do not want data in the Security log to be overwritten, but also do not want
your Windows Server 2003 computer to stop serving the network at any time.
What settings will you configure on your server?

In the properties for the Security log, configure the log to Do Not Overwrite Events (Clear Log
Manually). You will not define the Group Policy that defines the Security Option: Audit: Shut
Down System Immediately If Unable To Log Security Audits, as this will discontinue the server’s
availability to the network if the Security log fills. You will need to schedule a regular period of
Security log analysis as good administrative practice, but you will not need to do so at such a
frequency as to keep the server from shutting down because you did not clear the log soon
enough.